Downloads News & Events Home Sitemap Contact Us
About Us Business Solutions Partners Distributors Careers
SLN receives National Award from Government of India for R&D for the year 2008
PCB manufacturing
Artwork Preparation
Inner Layer Preparation
PCB Process
PCB Equipment (For Prototyping)
Ne-Cut Board Cutter
CNC Machine
Brushing Machine
Dry Film Laminator
Exposure Unit
Developing / Etching Machine
Galvanic Plating Machine
Multilayer Press
Waste Water Treatment
PCB Equipment
(Volume Production)
Shearing & Beveling
CNC - Drilling
Laser Drilling Machine
Reference Hole Drilling
CNC Double Column Drilling
Auto Guide Hole Punching
PCB Fixture Driling / Routing Machine
PWB Hole Analyzer /PWB Hole Tester
Scrubbing Machine
Electrolytic Plating (Pattern Plating)
Dry Film Lamination
Artwork Lamination
Photo Plotting
Photo Film Processing
Dry Film Exposure
Digital Direct Exposure
Dry Film Developer
DES Line (Developing / Etching / Stripping)
Surface Preparation
Solder Masking
Solder Mask Exposure
Solder Mask Developer
Hot Air Levelling
Legend Printing
CNC Routing
Board Washing
Electrical Testing
PCB Measuring Machine
PCB Final Inspection Machine
Image Processing system
Single spindle Drilling Machine With X-Ray
Single Spindle Drilling Machine With CCD Camera
Double Spindle Drilling Machine With CCD Camera
Double spindle Drilling Machine With X-Ray
Guide Hole Punching Machine for Felxible / Metal Board
Raw Material
Artwork Protect Film
UV Lamps
Measuring & Setting Equipment
Auto-Vision measuring system for dimension
Hi-speed position quality measuring for drill holes
Line Gauge
Point Gauge
Drill Diameter Measurement
Drill Repointing Machine
Ring Setting Machines
Pressure Vaccum Measurement
Run-out Indicator
PCB Equipment (for Prototyping) Multilayer Press

This high performance multilayer press was designed for PCB labs to enable quick prototyping of multilayer PCBs of up to 6 or 8 layers according to industry standards. A compact and floor standing aluminium rack contains all parts of the unit including pressure supply, press plates and heaters. The large loading door that allows quick and easy access to the pressure part is of course security switch protected. A compressor, which is integral part of RMP 210, is stored in the back of the machine. In the front, you will find additional storage room for tools or boards (lower door). The unit is controlled by two digital and adjustable thermostates, one digital timer as well as a pressure valve with pressure meter. Two strong air ventilators activated automatically during cooling cycle.


Steps of multilayer production with RMP 210:

  • boards are pinned and stack is inserted into press plates
  • pressure is created
  • heater is activated
  • heating up procedure
  • press procedure at preset temperature
  • cooling down under pressure
  • PCB stack is taken out of the machine
The sequence will take all at all approx. 3 hours. Gross size of the PCBs is 250 x 350 mm which will result in PCB net size of 210 x 300 mm.

Technical Data

Board size 250 x 350 mm gross 210 x 300 mm net
Pressure >12 tons working
Temperature 175 °C (adjustable)
Heating up about 30 min.
Pressure time about 60 min.
Cooling down about 120 min.
Weight 130 kg net
Power supply 230 V~, 50 hz, 16 A
Machine size (W x D x H ) 65 cm x 65 cm x 130 cm


  Goepel JTAG/Boundary scan software with intelligence
  Recovery, Repair, Recycle, Power off, Trouble Shooting Tools