PC/104 Digital I/O Module
The E497R is a PC/104-format digital I/O module available in two configurations: 48 I/O TTL channels and 16 High-Current Outputs and 16 Optoinsulated Inputs. Both configurations contain two 82C55 ICs, each having three 8-bits software configurable I/O ports. Each 82C55 has its own 50-pin I/O header for external connections. The ports direction can be selected by programming control registers built into the 82C55 chip. The I/O headers are organized to allow direct interfacing to OPTO-22 standard.
No review.M406R PC/104 PCMCIA Module
The M406R module is a Compact Flash type PCMCIA card adapter in PC/104 format. Available with a dual slot it integrates on board the VG-PD6722 controller, therefore no additional external controller are needed
No review.PC/104 Ethernet Module
The M429R module is a PC/104 16-bit high performance Ethernet interface. It integrates an Ethernet NE2000 compatible controller with installed both 10BaseT (twisted pair) and 10Base2 (coaxial) interfaces. From Setup it is possible to select address and interrupt line, moreover it is possible to select the transmission media and to autodetect the connection cable. The 10Base2 interface is available through an additional module installed on board. If only 10BaseT interface is selected, the 10Base2 module is disabled in order to reduce the module power consumption.
The M429R comes with drivers for a wide variety of networks ands operating systems.No review.Expansion – PC/104 ARCNET with 4 RS232 Serial Ports
The M435R module (such as M440R) is an ARCNET network interface module based on COM20020 controller and is an ideal solution for applications such as industrial control, building automation, transportation, robotics and gaming. For extended functionality, moreover, the M435R module is provided with 8 programmable Outputs and 4 standard RS-232C Full modem serial ports. Each of these serial ports can be configured to use standard addresses for COMS ports or can be software configured to be mapped at user chosen addresses. Also the IRQ’s can be SW configured, so that the ports can use different IRQ lines or share an unique line.
No review.Expansion – PC/104 CAN Bus with 4 RS232 Serial Port
The M437R module (such as M441R) is a low-cost, CAN Bus interface board that provides access to a wide range of CAN applications for PC/104 systems. The module is based on the Intel CAN controller 82527. The 82527 controller is a highly integrated device that performs all serial communication functions such as transmission and reception of messages, message filtering on extended message frames, transmit search and interrupt search with minimal interaction from the CPU. The M437R module supports the standard message frames in CAN Specification 2.0 Part A and also the standard and extended message frames in CAN Specification 2.0 Part B. The 82527 provides storage for 15 message objects of 8-byte data lenght. Each message object can be configured as either transmit or receive except for the last message object. The last message object is a receive-only buffer with a special mask design. The 82527 controller implements a global masking feature for both standard and extended message filtering, that allows the user to mask any identifier bits of the incoming message. The M437R module also integrates 4 serial ports, two RS232 Full Modem and two configurable as RS232 or RS485.
No review.Expansion – PC/104 ARCNET Module
The ARCNET protocol is the ideal solution for applications such as industrial control, building automation, transportation, robotics and gaming. ARCNET is simple to use, low-cost, extremely ruggedand high performing. The M440R module is based on COM20020 controller from SMSC. integrates the 2Kx8 RAM buffer onchip, the Command Chaining feature, the 5 Mbps maximum data rate and the duplicate node ID detection. The module is available in two configurations: with coaxial connection using a BNC connector, or with twisted-pair connection using a RJ-11 connector.
No review.Expansion – PC/104 CAN Bus
The M441R module is a low-cost, high-performance CAN interface board that provides access to a wide range of CAN applications for PC/104 systems. The module is based on the Intel® CAN controller 82527. The 82527 controller is a highly integrated device that performs all serial communication functions such as transmission and reception of messages, message filtering on extended message frames, transmit search and interrupt search with minimal interaction from the CPU. The M441R module supports the standard message frames in CAN Specification 2.0 Part A and also the standard and extended message frames in CAN Specification 2.0 Part B.
The 82527 provides storage for 15 message objects of 8-byte data lenght. Each message object can be configured as either transmit or receive except for the last message object. The last message object is a receive-only buffer with a special mask design. The 82527 controller implements a global masking feature for both standard and extended message filtering, that allows the user to mask any identifier bits of the incoming message.No review.PC/104 4 RS232 Serial Ports
The M442R module is a low-cost integrated module which offers the chance of expanding the communication possibilities of a PC/104 based system. The M442R module integrates 4 serial ports: two of them are RS-232C standard serial ports in a Full Modem configuration. The other two ports can be settled to work also in RS-232C Full Modem mode, or in a RS-422 or RS-485 mode. Addresses of the serial ports are default settled as standard COMs, but are user re-mappable in the I/O space. IRQ lines of serial ports are individually configurable.
No review.M520R PC/104 PCMCIA Module
The M520R module is a Compact Flash type PCMCIA card adapter in PC/104 format. Available with a single or dual slot it integrates on board the VG-PD6722 controller, therefore no additional external controller are needed.
No review.Mini PCI Adapter on PC/104 Plus
Conceived as expansion to the PC/104+ connector on which it links up to, the module allows the use of the Mini-PCI cards such as the Wi-Fi cards.
No review.
