ETX™-Baseboard M647R

Categories: Embedded Electronics & Solutions, COM and Carriers Modules

The M647R is a compact general purpose baseboard designed to be an easy solution for the use of ETX™ modules. With its CC-Talk interface it’s also suitable for gaming applications. It’s possible to mount on board up to 512MB Flash Disk modules. The M647R is well equipped with 2.5″ HDD connector, LVDS, VGA, 4 USB and Ethernet ports. The board can receive + 12V power supply directly through a Molex minifit connector or through a Kycon KPJX-4S connector plus relay and remote power button.

Description
Reviews (0)

ETX™ Baseboard

There are no reviews yet.

Be the first to review “ETX™-Baseboard M647R” Cancel reply

You must be logged in to post a comment.

M543R PC104 AMD Elan™ SC520 CPU

Embedded Electronics & Solutions, CPU Modules

ELAN™ SC520 CPU with ethernet controller

The M543R module is based on the high performances CPU ELAN™ SC520 from AMD (486 at 32 bits) 133 MHz. The module supports 32 MB or 64 MB DRAM directly soldered on- board. Optionally is available a memory chip for the error correction (ECC) management. It integrates some peripherals commonly used in standard PC applications, as Ethernet Controller 10/100baseT, 4 serials, 1 parallel, floppy and hard disk controller, socket for Solid State Disk, keyboard. The module needs only a + 5VDC supply. It can be used as stand-alone or in a PC/104 stack.

ETX™ M671R Celeron® M and Pentium® M

Embedded Electronics & Solutions, COM and Carriers Modules

The M671R is a new ETX™ CPU module designed by SECO, paying attention to customers requiring very high performances. The module is based on the Pentium® M CPU up to 1.8 GHz frequency, with Chipset Intel® 855GME (Intel® 852GME on the CM 600 MHz version) and front side bus at 400 MHz. The chipset has an integrated 2D/3D graphic controller, supporting AGP4x interface. An important feature in this module is the LVDS interface at 18bit Single and Dual Channel. The module integrates also Audio, Ultra-ATA/100 IDE interface, 1 Ethernet 10/100 BaseT, 4 USB 2.0 ports, 2 Full modem serial ports, 1 standard parallel, keyboard/mouse controllers, Real Time Clock and Watch Dog Timer. The ETX™ module is connected to the rest of the embedded system through 4 high density connectors that carry both ISA and PCI bus signals to a motherboard, where I/O connectors are placed, according to the customer requirements.

SECO104-CX700M – PC104(+) VIA EDEN™ V4 Ultra Low Voltage CPU

Embedded Electronics & Solutions, CPU Modules

The SECO104-CX700M is a PC/104-Plus CPU module based on VIA EDEN™ V4 LV/ULV CPUs from the LV at 400 MHz up to the ULV at 1.0 GHz that have best performance/power rates in the market. The SECO104-CX700M integrates the VIA CX700M™ chipset that utilizes VIA UniChrome™ Pro Integrated Graphics Processor (IGP), with integrated MPEG-2, MPPEG-4 and WMV9 Hardware decoder, ensuring optimal performance for all multimedia, entertainment, and productivity applications. Internal data flow is equivalent to the latest AGP 8X graphics cards. For perfect multimedia support, the M693R offers also Multi-configuration LVDS transmitter, Dual display support and a perfect audio, thanks to the acclaimed VIA Vinyl HD Audio suite. Supporting memories of DDR2 533/400/333 type up to 1GB on SODIMM socket and 1 Serial ATA device, the SECO104-CX700M has the I/O on-board connectors suitable for most of the embedded systems: 2 serial ports, 1 parallel, 2 USB 2.0, 1 Ethernet port 10/100BaseT and the PC/104-Plus format gives the possibility for many additional features of the embedded system. All this also in fanless operation.

M429R EXP. Ethernet

Embedded Electronics & Solutions, EXP Modules

The M429R module is a PC/104 16-bit high performance Ethernet interface. It integrates an Ethernet NE2000 compatible controller with installed both 10BaseT (twisted pair) and 10Base2 (coaxial) interfaces. From Setup it is possible to select address and interrupt line, moreover it is possible to select the transmission media and to autodetect the connection cable. The 10Base2 interface is available through an additional module installed on board. If only 10BaseT interface is selected, the 10Base2 module is disabled in order to reduce the module power consumption.
The M429R comes with drivers for a wide variety of networks ands operating systems.

M442R EXP. 4 RS232

Embedded Electronics & Solutions, EXP Modules

The M442R module is a low-cost integrated module which offers the chance of expanding the communication possibilities of a PC/104 based system. The M442R module integrates 4 serial ports: two of them are RS-232C standard serial ports in a Full Modem configuration.

MTS690R Touch Screen Controller

Embedded Electronics & Solutions, VARIOUS Modules

The MTS690R is a very compact module that allows the control of a 4 wire resistive touch screen.
The touchscreen can be configured to work in a relative (i.e., similar to mouse functioning) or in absolute mode (i.e., the controller recognises the co-ordinates of the pressure on the touch screen). In relative mode, the standard PS/2 interface allows to the user to use standard mouse drivers provided with his Operating System, while absolute mode drivers are supplied with the module.

SECOMX-945

Embedded Electronics & Solutions, COM and Carriers Modules

The SECOMX-945 is an XTX form factor module that SECO designs with the Intel® Celeron® M, Core® Duo, Core® 2 Duo processors with Intel® 945GME chipset. The board features also Audio, SATA (2x) and IDE Interfaces, Ethernet 10/100BaseT, 6x USB 2.0, keyboard/mouse PS/2, Real Time Clock and Watch Dog Timer.

SECOMEXP-945

Embedded Electronics & Solutions, COM and Carriers Modules

The SECOMEXP-945 is a module in the COM Express type 2 basic standard, based on the 945GME + ICH7-M and supports Intel Core 2 Duo, Core Duo and Celeron M processors. This module offers up to 8 USB 2.0 ports, 2 SATA, 1 IDE, 1 Gigabit Ethernet and up to 6 PCI-Express lane x1 (four of them also configurable as 1 PCIe x4), one of which is configurable as PCI-Express lane x16 (PEG) or as Dual Channel SDVO. The presence of a Dual Channel Memory interface, on 2 SO-DIMM DDR2 SDRAM sockets for up to 4 GB, enables higher performances with same clock frequencies of the CPU.

ETX™-Baseboard M647R

ETX™-Baseboard M647R

Be the first to review “ETX™-Baseboard M647R” Cancel reply

related items