MFD2 IDE Flash Disk

Categories: Embedded Electronics & Solutions, VARIOUS Modules

he MFD2 series IDE Flash Disk is a storage device based on HYPERSTONE F2-16XN NAND type Flash controller. The module is fully compatible with IDE ATA standard interface, 44 pins connector. The MFD is free of firmware driver and it works like a normal Hard Disk Drive.

Description
Reviews (0)

IDE Flash Disk

There are no reviews yet.

Be the first to review “MFD2 IDE Flash Disk” Cancel reply

You must be logged in to post a comment.

MTS690R Touch Screen Controller

Embedded Electronics & Solutions, VARIOUS Modules

The MTS690R is a very compact module that allows the control of a 4 wire resistive touch screen.
The touchscreen can be configured to work in a relative (i.e., similar to mouse functioning) or in absolute mode (i.e., the controller recognises the co-ordinates of the pressure on the touch screen). In relative mode, the standard PS/2 interface allows to the user to use standard mouse drivers provided with his Operating System, while absolute mode drivers are supplied with the module.

SECOMEXP-945

Embedded Electronics & Solutions, COM and Carriers Modules

The SECOMEXP-945 is a module in the COM Express type 2 basic standard, based on the 945GME + ICH7-M and supports Intel Core 2 Duo, Core Duo and Celeron M processors. This module offers up to 8 USB 2.0 ports, 2 SATA, 1 IDE, 1 Gigabit Ethernet and up to 6 PCI-Express lane x1 (four of them also configurable as 1 PCIe x4), one of which is configurable as PCI-Express lane x16 (PEG) or as Dual Channel SDVO. The presence of a Dual Channel Memory interface, on 2 SO-DIMM DDR2 SDRAM sockets for up to 4 GB, enables higher performances with same clock frequencies of the CPU.

E497R EXP. digital I/O

Embedded Electronics & Solutions, EXP Modules

The E497R is a PC/104-format digital I/O module available in two configurations: 48 I/O TTL channels and 16 High-Current Outputs and 16 Optoinsulated Inputs. Both configurations contain two 82C55 ICs, each having three 8-bits software configurable I/O ports. Each 82C55 has its own 50-pin I/O header for external connections. The ports direction can be selected by programming control registers built into the 82C55 chip. The I/O headers are organized to allow direct interfacing to OPTO-22 standard.

SECO104-CX700M – PC104(+) VIA EDEN™ V4 Ultra Low Voltage CPU

Embedded Electronics & Solutions, CPU Modules

The SECO104-CX700M is a PC/104-Plus CPU module based on VIA EDEN™ V4 LV/ULV CPUs from the LV at 400 MHz up to the ULV at 1.0 GHz that have best performance/power rates in the market. The SECO104-CX700M integrates the VIA CX700M™ chipset that utilizes VIA UniChrome™ Pro Integrated Graphics Processor (IGP), with integrated MPEG-2, MPPEG-4 and WMV9 Hardware decoder, ensuring optimal performance for all multimedia, entertainment, and productivity applications. Internal data flow is equivalent to the latest AGP 8X graphics cards. For perfect multimedia support, the M693R offers also Multi-configuration LVDS transmitter, Dual display support and a perfect audio, thanks to the acclaimed VIA Vinyl HD Audio suite. Supporting memories of DDR2 533/400/333 type up to 1GB on SODIMM socket and 1 Serial ATA device, the SECO104-CX700M has the I/O on-board connectors suitable for most of the embedded systems: 2 serial ports, 1 parallel, 2 USB 2.0, 1 Ethernet port 10/100BaseT and the PC/104-Plus format gives the possibility for many additional features of the embedded system. All this also in fanless operation.

M441R Can Bus

Embedded Electronics & Solutions, EXP Modules

The M441R module is a low-cost, high-performance CAN interface board that provides access to a wide range of CAN applications for PC/104 systems. The module is based on the Intel® CAN controller 82527. The 82527 controller is a highly integrated device that performs all serial communication functions such as transmission and reception of messages, message filtering on extended message frames, transmit search and interrupt search with minimal interaction from the CPU.

M429R EXP. Ethernet

Embedded Electronics & Solutions, EXP Modules

The M429R module is a PC/104 16-bit high performance Ethernet interface. It integrates an Ethernet NE2000 compatible controller with installed both 10BaseT (twisted pair) and 10Base2 (coaxial) interfaces. From Setup it is possible to select address and interrupt line, moreover it is possible to select the transmission media and to autodetect the connection cable. The 10Base2 interface is available through an additional module installed on board. If only 10BaseT interface is selected, the 10Base2 module is disabled in order to reduce the module power consumption.
The M429R comes with drivers for a wide variety of networks ands operating systems.

M585R PC104 – PC104+ Celeron® CPU

Embedded Electronics & Solutions, CPU Modules

The M585R module is a new PC/104-Plus CPU module based on the Intel® Celeron® Ultra Low Voltage 400 and 650 MHz processors. The module uses the VIA ProSavage Twister T (PN133T) chipset with integrated Savage4 2D/3D Video Accelerator and supports 4X AGP VGA/LCD interface and up to 32 MB video memory. The module also integrates the VIA enhanced audio, 2 serials, 2 USB ports, 1 parallel, up to 512 MB SDRAM, 10/100BaseT Ethernet, EIDE interface (with the possibility to use IDE Flash Disks up to 2GB), keyboard/mouse controllers, Real Time Clock and Watch Dog Timer. It is able to communicate with other peripheral boards via ISA-Bus (PC/104) and also via PCI-Bus (PC/104-Plus).

M695R Mini PCI

Embedded Electronics & Solutions, EXP Modules

Conceived as expansion to the PC/104+ connector on which it links up to, the module allows the use of the Mini-PCI cards such as the Wi-Fi cards.

MFD2 IDE Flash Disk

MFD2 IDE Flash Disk

Be the first to review “MFD2 IDE Flash Disk” Cancel reply

related items