Quadmo747 Module by SECO on Qseven™ Form Factor
The new Quadmo747 board is the new Qseven™ platform designed by SECO on Intel® Atom™ architecture.
SECO is a founding member of Qseven™ Consortium.
The new Quadmo747 board is the new Qseven™ platform designed by SECO on Intel® Atom™ architecture.
SECO is a founding member of Qseven™ Consortium.
Be the first to review “Quadmo747” Cancel reply
You must be logged in to post a comment.
related items
The Ellipse 12 is an All-In-One LCD PC based on an embedded PC architecture which mounts a Celeron® M Processor at 800MHz. As integrated LCD PC, Ellipse 12 can be used as stand-alone PC or Networking Terminal. It integrates a 12.1″ TFT display with 800×600 resolution 16.8 mil. colors, allowing an extended visual area and with the option of Touch Screen it is suitable for any kind of interactive applications. With up to 1GB of System DRAM and 256 Kbytes Cache, ELLIPSE 12 supports the most common Operating Systems: Windows XP and Linux.
The M520R module is a Compact Flash type PCMCIA card adapter in PC/104 format. Available with a single or dual slot it integrates on board the VG-PD6722 controller, therefore no additional external controller are needed.
The M600R is an ETX™ baseboard designed to be the startup for any customer that begin to valuate ETX™ board’s charateristics. M600R has two different set of connectors: front panel connectors (PS/2 mouse & keyboard, USB, Ethernet, Parallels and Serials, VGA) and on board connectors (ATX Power, IrDA, PC/104 and PC/104 Plus, PCI slots, Floppy Disk, Hard Disk, LVDS, Video Out).
The M437R module (such as M441R) is a low-cost, CAN Bus interface board that provides access to a wide range of CAN applications for PC/104 systems. The module is based on the Intel CAN controller 82527.
The M442R module is a low-cost integrated module which offers the chance of expanding the communication possibilities of a PC/104 based system. The M442R module integrates 4 serial ports: two of them are RS-232C standard serial ports in a Full Modem configuration.
The SECO104-CX700M is a PC/104-Plus CPU module based on VIA EDEN™ V4 LV/ULV CPUs from the LV at 400 MHz up to the ULV at 1.0 GHz that have best performance/power rates in the market. The SECO104-CX700M integrates the VIA CX700M™ chipset that utilizes VIA UniChrome™ Pro Integrated Graphics Processor (IGP), with integrated MPEG-2, MPPEG-4 and WMV9 Hardware decoder, ensuring optimal performance for all multimedia, entertainment, and productivity applications. Internal data flow is equivalent to the latest AGP 8X graphics cards. For perfect multimedia support, the M693R offers also Multi-configuration LVDS transmitter, Dual display support and a perfect audio, thanks to the acclaimed VIA Vinyl HD Audio suite. Supporting memories of DDR2 533/400/333 type up to 1GB on SODIMM socket and 1 Serial ATA device, the SECO104-CX700M has the I/O on-board connectors suitable for most of the embedded systems: 2 serial ports, 1 parallel, 2 USB 2.0, 1 Ethernet port 10/100BaseT and the PC/104-Plus format gives the possibility for many additional features of the embedded system. All this also in fanless operation.
The M706R is the SECO EPIC™ board with Intel® Celeron® M and Pentium® M processors, Intel® 855GME / ICH4 chipset and 2/3 D Graphic Controller, supporting AGP4x interface. This board integrates many features for the most demanding applications. So, on the fronplate there are 2 serial ports, 4 USB 2.0 ports, 2x 10/100BaseT and 1x 10/100/1000BaseT Ethernet ports (1000BaseT optional), 1 parallel, 1 DVI and 1 CRT connector. There is also a slot for the increasingly used Compact Flash and the possibility to use 15 GPIOs. This all, added with the possibility of PC/104 and PC/104-Plus expansion boards, offers a very performing solution for many embedded applications.
The E497R is a PC/104-format digital I/O module available in two configurations: 48 I/O TTL channels and 16 High-Current Outputs and 16 Optoinsulated Inputs. Both configurations contain two 82C55 ICs, each having three 8-bits software configurable I/O ports. Each 82C55 has its own 50-pin I/O header for external connections. The ports direction can be selected by programming control registers built into the 82C55 chip. The I/O headers are organized to allow direct interfacing to OPTO-22 standard.
There are no reviews yet.