SECOMX-945

Categories: Embedded Electronics & Solutions, COM and Carriers Modules

The SECOMX-945 is an XTX form factor module that SECO designs with the Intel® Celeron® M, Core® Duo, Core® 2 Duo processors with Intel® 945GME chipset. The board features also Audio, SATA (2x) and IDE Interfaces, Ethernet 10/100BaseT, 6x USB 2.0, keyboard/mouse PS/2, Real Time Clock and Watch Dog Timer.

Description
Reviews (0)

SECOMX-945 XTX™ Intel® Celeron® M, Core® Duo, Core® 2 Duo Families and Intel® 945 GME Chipset

There are no reviews yet.

Be the first to review “SECOMX-945” Cancel reply

You must be logged in to post a comment.

Quadmo747

Embedded Electronics & Solutions, COM and Carriers Modules

The new Quadmo747 board is the new Qseven™ platform designed by SECO on Intel® Atom™ architecture.
SECO is a founding member of Qseven™ Consortium.

SECOMEXP-945

Embedded Electronics & Solutions, COM and Carriers Modules

The SECOMEXP-945 is a module in the COM Express type 2 basic standard, based on the 945GME + ICH7-M and supports Intel Core 2 Duo, Core Duo and Celeron M processors. This module offers up to 8 USB 2.0 ports, 2 SATA, 1 IDE, 1 Gigabit Ethernet and up to 6 PCI-Express lane x1 (four of them also configurable as 1 PCIe x4), one of which is configurable as PCI-Express lane x16 (PEG) or as Dual Channel SDVO. The presence of a Dual Channel Memory interface, on 2 SO-DIMM DDR2 SDRAM sockets for up to 4 GB, enables higher performances with same clock frequencies of the CPU.

M695R Mini PCI

Embedded Electronics & Solutions, EXP Modules

Conceived as expansion to the PC/104+ connector on which it links up to, the module allows the use of the Mini-PCI cards such as the Wi-Fi cards.

M543R PC104 AMD Elan™ SC520 CPU

Embedded Electronics & Solutions, CPU Modules

ELAN™ SC520 CPU with ethernet controller

The M543R module is based on the high performances CPU ELAN™ SC520 from AMD (486 at 32 bits) 133 MHz. The module supports 32 MB or 64 MB DRAM directly soldered on- board. Optionally is available a memory chip for the error correction (ECC) management. It integrates some peripherals commonly used in standard PC applications, as Ethernet Controller 10/100baseT, 4 serials, 1 parallel, floppy and hard disk controller, socket for Solid State Disk, keyboard. The module needs only a + 5VDC supply. It can be used as stand-alone or in a PC/104 stack.

M440R ARCNET

Embedded Electronics & Solutions, EXP Modules

The ARCNET protocol is the ideal solution for applications such as industrial control, building automation, transportation, robotics and gaming. ARCNET is simple to use, low-cost, extremely ruggedand high performing.

M435R ARCNET with 4 RS232

Embedded Electronics & Solutions, EXP Modules

The M435R module (such as M440R) is an ARCNET network interface module based on COM20020 controller and is an ideal solution for applications such as industrial control, building automation, transportation, robotics and gaming. For extended functionality, moreover, the M435R module is provided with 8 programmable Outputs and 4 standard RS-232C Full modem serial ports. Each of these serial ports can be configured to use standard addresses for COMS ports or can be software configured to be mapped at user chosen addresses. Also the IRQ’s can be SW configured, so that the ports can use different IRQ lines or share an unique line.

M406R PC104 PCMCIA

Embedded Electronics & Solutions, EXP Modules

The M406R module is a Compact Flash type PCMCIA card adapter in PC/104 format. Available with a dual slot it integrates on board the VG-PD6722 controller, therefore no additional external controller are needed

M437R CAN Bus with 4 RS232

Embedded Electronics & Solutions, EXP Modules

The M437R module (such as M441R) is a low-cost, CAN Bus interface board that provides access to a wide range of CAN applications for PC/104 systems. The module is based on the Intel CAN controller 82527.

SECOMX-945

SECOMX-945

Be the first to review “SECOMX-945” Cancel reply

related items