M406R PC/104 PCMCIA Module
The M406R module is a Compact Flash type PCMCIA card adapter in PC/104 format. Available with a dual slot it integrates on board the VG-PD6722 controller, therefore no additional external controller are needed
The M406R module is a Compact Flash type PCMCIA card adapter in PC/104 format. Available with a dual slot it integrates on board the VG-PD6722 controller, therefore no additional external controller are needed
Be the first to review “M406R PC104 PCMCIA” Cancel reply
You must be logged in to post a comment.
related items
The SECOMEXP-945 is a module in the COM Express type 2 basic standard, based on the 945GME + ICH7-M and supports Intel Core 2 Duo, Core Duo and Celeron M processors. This module offers up to 8 USB 2.0 ports, 2 SATA, 1 IDE, 1 Gigabit Ethernet and up to 6 PCI-Express lane x1 (four of them also configurable as 1 PCIe x4), one of which is configurable as PCI-Express lane x16 (PEG) or as Dual Channel SDVO. The presence of a Dual Channel Memory interface, on 2 SO-DIMM DDR2 SDRAM sockets for up to 4 GB, enables higher performances with same clock frequencies of the CPU.
The new Quadmo747 board is the new Qseven™ platform designed by SECO on Intel® Atom™ architecture.
SECO is a founding member of Qseven™ Consortium.
ELAN™ SC520 CPU with ethernet controller
The M543R module is based on the high performances CPU ELAN™ SC520 from AMD (486 at 32 bits) 133 MHz. The module supports 32 MB or 64 MB DRAM directly soldered on- board. Optionally is available a memory chip for the error correction (ECC) management. It integrates some peripherals commonly used in standard PC applications, as Ethernet Controller 10/100baseT, 4 serials, 1 parallel, floppy and hard disk controller, socket for Solid State Disk, keyboard. The module needs only a + 5VDC supply. It can be used as stand-alone or in a PC/104 stack.
The Ellipse 12 is an All-In-One LCD PC based on an embedded PC architecture which mounts a Celeron® M Processor at 800MHz. As integrated LCD PC, Ellipse 12 can be used as stand-alone PC or Networking Terminal. It integrates a 12.1″ TFT display with 800×600 resolution 16.8 mil. colors, allowing an extended visual area and with the option of Touch Screen it is suitable for any kind of interactive applications. With up to 1GB of System DRAM and 256 Kbytes Cache, ELLIPSE 12 supports the most common Operating Systems: Windows XP and Linux.
The M671R is a new ETX™ CPU module designed by SECO, paying attention to customers requiring very high performances. The module is based on the Pentium® M CPU up to 1.8 GHz frequency, with Chipset Intel® 855GME (Intel® 852GME on the CM 600 MHz version) and front side bus at 400 MHz. The chipset has an integrated 2D/3D graphic controller, supporting AGP4x interface. An important feature in this module is the LVDS interface at 18bit Single and Dual Channel. The module integrates also Audio, Ultra-ATA/100 IDE interface, 1 Ethernet 10/100 BaseT, 4 USB 2.0 ports, 2 Full modem serial ports, 1 standard parallel, keyboard/mouse controllers, Real Time Clock and Watch Dog Timer. The ETX™ module is connected to the rest of the embedded system through 4 high density connectors that carry both ISA and PCI bus signals to a motherboard, where I/O connectors are placed, according to the customer requirements.
The M441R module is a low-cost, high-performance CAN interface board that provides access to a wide range of CAN applications for PC/104 systems. The module is based on the Intel® CAN controller 82527. The 82527 controller is a highly integrated device that performs all serial communication functions such as transmission and reception of messages, message filtering on extended message frames, transmit search and interrupt search with minimal interaction from the CPU.
The M585R module is a new PC/104-Plus CPU module based on the Intel® Celeron® Ultra Low Voltage 400 and 650 MHz processors. The module uses the VIA ProSavage Twister T (PN133T) chipset with integrated Savage4 2D/3D Video Accelerator and supports 4X AGP VGA/LCD interface and up to 32 MB video memory. The module also integrates the VIA enhanced audio, 2 serials, 2 USB ports, 1 parallel, up to 512 MB SDRAM, 10/100BaseT Ethernet, EIDE interface (with the possibility to use IDE Flash Disks up to 2GB), keyboard/mouse controllers, Real Time Clock and Watch Dog Timer. It is able to communicate with other peripheral boards via ISA-Bus (PC/104) and also via PCI-Bus (PC/104-Plus).
The MTS690R is a very compact module that allows the control of a 4 wire resistive touch screen.
The touchscreen can be configured to work in a relative (i.e., similar to mouse functioning) or in absolute mode (i.e., the controller recognises the co-ordinates of the pressure on the touch screen). In relative mode, the standard PS/2 interface allows to the user to use standard mouse drivers provided with his Operating System, while absolute mode drivers are supplied with the module.
There are no reviews yet.