Mini PCI Adapter on PC/104 Plus
Conceived as expansion to the PC/104+ connector on which it links up to, the module allows the use of the Mini-PCI cards such as the Wi-Fi cards.
Conceived as expansion to the PC/104+ connector on which it links up to, the module allows the use of the Mini-PCI cards such as the Wi-Fi cards.
Be the first to review “M695R Mini PCI” Cancel reply
You must be logged in to post a comment.
related items
The M442R module is a low-cost integrated module which offers the chance of expanding the communication possibilities of a PC/104 based system. The M442R module integrates 4 serial ports: two of them are RS-232C standard serial ports in a Full Modem configuration.
The M437R module (such as M441R) is a low-cost, CAN Bus interface board that provides access to a wide range of CAN applications for PC/104 systems. The module is based on the Intel CAN controller 82527.
The M406R module is a Compact Flash type PCMCIA card adapter in PC/104 format. Available with a dual slot it integrates on board the VG-PD6722 controller, therefore no additional external controller are needed
The M706R is the SECO EPIC™ board with Intel® Celeron® M and Pentium® M processors, Intel® 855GME / ICH4 chipset and 2/3 D Graphic Controller, supporting AGP4x interface. This board integrates many features for the most demanding applications. So, on the fronplate there are 2 serial ports, 4 USB 2.0 ports, 2x 10/100BaseT and 1x 10/100/1000BaseT Ethernet ports (1000BaseT optional), 1 parallel, 1 DVI and 1 CRT connector. There is also a slot for the increasingly used Compact Flash and the possibility to use 15 GPIOs. This all, added with the possibility of PC/104 and PC/104-Plus expansion boards, offers a very performing solution for many embedded applications.
C527R is a compact module that allows the use of Compact Flash Cards with any board with a 2.5″ IDE connector available. For the connection, only a 44 poles flat cable is needed. Power supply to the board is given directly through this flat cable (like for 2.5″ standard HDD). It doesn’t require software drivers, Compact Flash are managed like standard Hard Disk Driver.
Both Type I and Type II Compact Flash Cards, at +3.3 VDC or +5VDC voltage, are supported.
The M671R is a new ETX™ CPU module designed by SECO, paying attention to customers requiring very high performances. The module is based on the Pentium® M CPU up to 1.8 GHz frequency, with Chipset Intel® 855GME (Intel® 852GME on the CM 600 MHz version) and front side bus at 400 MHz. The chipset has an integrated 2D/3D graphic controller, supporting AGP4x interface. An important feature in this module is the LVDS interface at 18bit Single and Dual Channel. The module integrates also Audio, Ultra-ATA/100 IDE interface, 1 Ethernet 10/100 BaseT, 4 USB 2.0 ports, 2 Full modem serial ports, 1 standard parallel, keyboard/mouse controllers, Real Time Clock and Watch Dog Timer. The ETX™ module is connected to the rest of the embedded system through 4 high density connectors that carry both ISA and PCI bus signals to a motherboard, where I/O connectors are placed, according to the customer requirements.
The ARCNET protocol is the ideal solution for applications such as industrial control, building automation, transportation, robotics and gaming. ARCNET is simple to use, low-cost, extremely ruggedand high performing.
The M585R module is a new PC/104-Plus CPU module based on the Intel® Celeron® Ultra Low Voltage 400 and 650 MHz processors. The module uses the VIA ProSavage Twister T (PN133T) chipset with integrated Savage4 2D/3D Video Accelerator and supports 4X AGP VGA/LCD interface and up to 32 MB video memory. The module also integrates the VIA enhanced audio, 2 serials, 2 USB ports, 1 parallel, up to 512 MB SDRAM, 10/100BaseT Ethernet, EIDE interface (with the possibility to use IDE Flash Disks up to 2GB), keyboard/mouse controllers, Real Time Clock and Watch Dog Timer. It is able to communicate with other peripheral boards via ISA-Bus (PC/104) and also via PCI-Bus (PC/104-Plus).
There are no reviews yet.