Manufacturer: Bungard Elektronik, Germany RMB300
A professional brushing machine designed for use in small series production and laboratories
No review.The Bungard CCD/2 is a high quality Computer Controlled Drilling machine with semi-automatic tool change. In contrast to the CCD/MTC the CCD/2 has a half sized work area (325 x 250 compared to 325 x 495mm) and an integrated control unit underneath the table.
Compared to the ATC models, the software interrupts the operation during the tool change and the new tool is changed manually (turning the knob changes by a quarter turn; motors remain empowered and hold the position).
The CCD/2 has the same robustness and precision as all the other CCD models. It is ideal as an entry-level model for isolation milling. If you want to operate the CCD/2 with cooling, you need to protect the control unit from the cooling. Please contact us beforehand.
In contrast to all other CCD models, the machine zero point is at the front left. The X axis is the traverse over the table, whereas the Y-axis is located on table level. The CCD/2 cannot be converted to automatic tool change. If you possibly want to upgrade at a later time, please contact us before purchase. If necessary we can create a special version.
No review.A professional unit that integrates all important steps of PCB wet processing.
Four treatment tanks (from left to right side):
- Static pre rinse
- Static plus fresh water spray rinse (including magn. valve and foot-switch)
- Tank with basket and bath movement by pump, For resist stripping or developing
- Spare tank, i.e. for electroless tin
Spray etching/developing compartment:
- Professional spray etching technology
- 100 µm line definition Etching speed with standard Fe-III-Cl: 35 µm Cu in 90s
- Max. board size 210 x 300 mm (Splash Center XL 300 x 400mm)
- Magnetic driven spray pump
- Built-in 1000 W heater
- Thermostat controlled
- Overheat protection
- Security lid switch
- Digital timer with count-down, auto-reset and beeper
- Also suitable for spray developing
- Special shadow-free PCB holder (titanium)
- Drop-off position for holder (see picture)
No review.The RLM is a dry film laminator especially made for small companies, schools, research and development departments. All commercial laminates for PCB manufacture and mould-etching part technique can be processed. Due to adjustable pressure control and adjustable laminating speed, solder mask application is also possible without problems.
The machine is also used in very successfully in other application fields like WAFER MASKING and SMT STENCIL production or METAL WORKING.
No review.Manufacturer: Bungard Elektronik, Germany HELLAS
High precision vacuum exposure unit especially designed for double sided contact exposure of presensitized base materials such as tampon printing clichés, PCBs, front-panels, daylight films and other UV sensitive coatings.
No review.Manufacturer: Bungard Elektronik, Germany Galvanic Plating Machine
Professional equipment for laboratory prototyping of through-hole plated PCBs up to 210 x 300 mm size. Clean system including built-in rinsing compartment. Maintenance free and made for easy processing and handling. This particular machine type is optimized in terms of space requirements and costs. Compacta L 30 is suitable for the Dexter 3 D process (known on the market as the ABC chemical system). Bigger and customized units are also available (see our web site for COMPACTA L 400).
No review.This high performance multilayer press was designed for PCB labs to enable quick prototyping of multilayer PCBs of up to 6 or 8 layers according to industry standards. A compact and floor standing aluminium rack contains all parts of the unit including pressure supply, press plates and heaters. The large loading door that allows quick and easy access to the pressure part is of course security switch protected. A compressor, which is integral part of RMP 210, is stored in the back of the machine. In the front, you will find additional storage room for tools or boards (lower door). The unit is controlled by two digital and adjustable thermostates, one digital timer as well as a pressure valve with pressure meter. Two strong air ventilators activated automatically during cooling cycle.
No review.Manufacturer: Bungard Elektronik, Germany Ne-Cut Board Cutter
Ne-Cut was developed for cutting of PCBs (0-3 mm), Aluminum (0-2mm), steel (0-1 mm), plastics (0-5 mm) and even films and artworks.
No review.Manufacturer: Bungard Elektronik, Germany PhotoPlotter FilmStar
Our Film Star is a small raster photo plotter designed for users who need to make their quality film artwork at a low price and quickly on the spot. Beside Gerber files (both standard and extended), Film Star also works simply with (hi-resolution) BMP files like those that you can export from standard software, say Corel Draw ™(R) or others. Although Film Star is a small photo plotter it does a very good job. The astonishing low price is a result of both sophisticated design and low manufacturing cost.
No review.Manufacturer: Bungard Elektronik, Germany IONEX
The name IONEX stands for ION Exchanger, which is the very heart of this modern waste water treatment system. In total it consists of a two-stage filtration, two ion-exchange and one PH-leveling units. IONEX is ideally suited for all waste water cleaning processes in modern PCB prototype laboratories. The drain water quality from this system is in accordance to German directives, which are of the highest standards world wide! The units exist in four variants with different sump capacities and ion exchange capacities.
No review.
