E497R EXP. digital I/O

Categories: Embedded Electronics & Solutions, EXP Modules

The E497R is a PC/104-format digital I/O module available in two configurations: 48 I/O TTL channels and 16 High-Current Outputs and 16 Optoinsulated Inputs. Both configurations contain two 82C55 ICs, each having three 8-bits software configurable I/O ports. Each 82C55 has its own 50-pin I/O header for external connections. The ports direction can be selected by programming control registers built into the 82C55 chip. The I/O headers are organized to allow direct interfacing to OPTO-22 standard.

Description
Reviews (0)

PC/104 Digital I/O Module

There are no reviews yet.

Be the first to review “E497R EXP. digital I/O” Cancel reply

You must be logged in to post a comment.

SECOMX-945

Embedded Electronics & Solutions, COM and Carriers Modules

The SECOMX-945 is an XTX form factor module that SECO designs with the Intel® Celeron® M, Core® Duo, Core® 2 Duo processors with Intel® 945GME chipset. The board features also Audio, SATA (2x) and IDE Interfaces, Ethernet 10/100BaseT, 6x USB 2.0, keyboard/mouse PS/2, Real Time Clock and Watch Dog Timer.

M442R EXP. 4 RS232

Embedded Electronics & Solutions, EXP Modules

The M442R module is a low-cost integrated module which offers the chance of expanding the communication possibilities of a PC/104 based system. The M442R module integrates 4 serial ports: two of them are RS-232C standard serial ports in a Full Modem configuration.

M406R PC104 PCMCIA

Embedded Electronics & Solutions, EXP Modules

The M406R module is a Compact Flash type PCMCIA card adapter in PC/104 format. Available with a dual slot it integrates on board the VG-PD6722 controller, therefore no additional external controller are needed

MTS690R Touch Screen Controller

Embedded Electronics & Solutions, VARIOUS Modules

The MTS690R is a very compact module that allows the control of a 4 wire resistive touch screen.
The touchscreen can be configured to work in a relative (i.e., similar to mouse functioning) or in absolute mode (i.e., the controller recognises the co-ordinates of the pressure on the touch screen). In relative mode, the standard PS/2 interface allows to the user to use standard mouse drivers provided with his Operating System, while absolute mode drivers are supplied with the module.

M543R PC104 AMD Elan™ SC520 CPU

Embedded Electronics & Solutions, CPU Modules

ELAN™ SC520 CPU with ethernet controller

The M543R module is based on the high performances CPU ELAN™ SC520 from AMD (486 at 32 bits) 133 MHz. The module supports 32 MB or 64 MB DRAM directly soldered on- board. Optionally is available a memory chip for the error correction (ECC) management. It integrates some peripherals commonly used in standard PC applications, as Ethernet Controller 10/100baseT, 4 serials, 1 parallel, floppy and hard disk controller, socket for Solid State Disk, keyboard. The module needs only a + 5VDC supply. It can be used as stand-alone or in a PC/104 stack.

ETX™-Baseboard M682R with Mini PCI Slot & TS CTRL

Embedded Electronics & Solutions, COM and Carriers Modules

The M682R is a compact baseboard designed to be a solution for the use of ETX™ modules. With its Mini PCI socket soldered on board it’s also suitable for applications that require Wi-Fi connections. Its very small dimensions are also the main characteristic that enables the use in wide range of products of ETX™ CPU modules.

SECOMX-945/M72

Embedded Electronics & Solutions, COM and Carriers Modules

The new XTX™ form factor SECOMX-945/M72 CPU module combine the Intel® Pentium® M processor with the Intel® 945GME chipset and the graphic controller ATI Mobility™ Radeon™ E2400 GPU that assure high level performances fot those 3D and high resolution demanding applications. Furthermore the SECOMX-945/M72 features Audio, SATA (2x) and IDE Interfaces, Ethernet 10/100BaseT, 6x USB 2.0, keyboard/mouse PS/2, Real Time Clock and Watch Dog Timer. Thanks to the ATI™ GPU the module support Windows® Vista Aero Operating Systems.

C527R Compact Flash IDE Adapter

Embedded Electronics & Solutions, VARIOUS Modules

C527R is a compact module that allows the use of Compact Flash Cards with any board with a 2.5″ IDE connector available. For the connection, only a 44 poles flat cable is needed. Power supply to the board is given directly through this flat cable (like for 2.5″ standard HDD). It doesn’t require software drivers, Compact Flash are managed like standard Hard Disk Driver.
Both Type I and Type II Compact Flash Cards, at +3.3 VDC or +5VDC voltage, are supported.

E497R EXP. digital I/O

E497R EXP. digital I/O

Be the first to review “E497R EXP. digital I/O” Cancel reply

related items