M440R ARCNET

Categories: Embedded Electronics & Solutions, EXP Modules

Description
Reviews (0)

Expansion – PC/104 ARCNET Module

The ARCNET protocol is the ideal solution for applications such as industrial control, building automation, transportation, robotics and gaming. ARCNET is simple to use, low-cost, extremely ruggedand high performing. The M440R module is based on COM20020 controller from SMSC. integrates the 2Kx8 RAM buffer onchip, the Command Chaining feature, the 5 Mbps maximum data rate and the duplicate node ID detection. The module is available in two configurations: with coaxial connection using a BNC connector, or with twisted-pair connection using a RJ-11 connector.

There are no reviews yet.

Be the first to review “M440R ARCNET” Cancel reply

You must be logged in to post a comment.

E497R EXP. digital I/O

Embedded Electronics & Solutions, EXP Modules

The E497R is a PC/104-format digital I/O module available in two configurations: 48 I/O TTL channels and 16 High-Current Outputs and 16 Optoinsulated Inputs. Both configurations contain two 82C55 ICs, each having three 8-bits software configurable I/O ports. Each 82C55 has its own 50-pin I/O header for external connections. The ports direction can be selected by programming control registers built into the 82C55 chip. The I/O headers are organized to allow direct interfacing to OPTO-22 standard.

M437R CAN Bus with 4 RS232

Embedded Electronics & Solutions, EXP Modules

The M437R module (such as M441R) is a low-cost, CAN Bus interface board that provides access to a wide range of CAN applications for PC/104 systems. The module is based on the Intel CAN controller 82527.

SECOMX-945

Embedded Electronics & Solutions, COM and Carriers Modules

The SECOMX-945 is an XTX form factor module that SECO designs with the Intel® Celeron® M, Core® Duo, Core® 2 Duo processors with Intel® 945GME chipset. The board features also Audio, SATA (2x) and IDE Interfaces, Ethernet 10/100BaseT, 6x USB 2.0, keyboard/mouse PS/2, Real Time Clock and Watch Dog Timer.

C527R Compact Flash IDE Adapter

Embedded Electronics & Solutions, VARIOUS Modules

C527R is a compact module that allows the use of Compact Flash Cards with any board with a 2.5″ IDE connector available. For the connection, only a 44 poles flat cable is needed. Power supply to the board is given directly through this flat cable (like for 2.5″ standard HDD). It doesn’t require software drivers, Compact Flash are managed like standard Hard Disk Driver.
Both Type I and Type II Compact Flash Cards, at +3.3 VDC or +5VDC voltage, are supported.

MTS690R Touch Screen Controller

Embedded Electronics & Solutions, VARIOUS Modules

The MTS690R is a very compact module that allows the control of a 4 wire resistive touch screen.
The touchscreen can be configured to work in a relative (i.e., similar to mouse functioning) or in absolute mode (i.e., the controller recognises the co-ordinates of the pressure on the touch screen). In relative mode, the standard PS/2 interface allows to the user to use standard mouse drivers provided with his Operating System, while absolute mode drivers are supplied with the module.

ETX™-Baseboard M647R

Embedded Electronics & Solutions, COM and Carriers Modules

The M647R is a compact general purpose baseboard designed to be an easy solution for the use of ETX™ modules. With its CC-Talk interface it’s also suitable for gaming applications. It’s possible to mount on board up to 512MB Flash Disk modules. The M647R is well equipped with 2.5″ HDD connector, LVDS, VGA, 4 USB and Ethernet ports. The board can receive + 12V power supply directly through a Molex minifit connector or through a Kycon KPJX-4S connector plus relay and remote power button.

SECOMEXP-945

Embedded Electronics & Solutions, COM and Carriers Modules

The SECOMEXP-945 is a module in the COM Express type 2 basic standard, based on the 945GME + ICH7-M and supports Intel Core 2 Duo, Core Duo and Celeron M processors. This module offers up to 8 USB 2.0 ports, 2 SATA, 1 IDE, 1 Gigabit Ethernet and up to 6 PCI-Express lane x1 (four of them also configurable as 1 PCIe x4), one of which is configurable as PCI-Express lane x16 (PEG) or as Dual Channel SDVO. The presence of a Dual Channel Memory interface, on 2 SO-DIMM DDR2 SDRAM sockets for up to 4 GB, enables higher performances with same clock frequencies of the CPU.

M543R PC104 AMD Elan™ SC520 CPU

Embedded Electronics & Solutions, CPU Modules

ELAN™ SC520 CPU with ethernet controller

The M543R module is based on the high performances CPU ELAN™ SC520 from AMD (486 at 32 bits) 133 MHz. The module supports 32 MB or 64 MB DRAM directly soldered on- board. Optionally is available a memory chip for the error correction (ECC) management. It integrates some peripherals commonly used in standard PC applications, as Ethernet Controller 10/100baseT, 4 serials, 1 parallel, floppy and hard disk controller, socket for Solid State Disk, keyboard. The module needs only a + 5VDC supply. It can be used as stand-alone or in a PC/104 stack.

M440R ARCNET

M440R ARCNET

Be the first to review “M440R ARCNET” Cancel reply

related items