M442R EXP. 4 RS232

Categories: Embedded Electronics & Solutions, EXP Modules

Description
Reviews (0)

PC/104 4 RS232 Serial Ports

The M442R module is a low-cost integrated module which offers the chance of expanding the communication possibilities of a PC/104 based system. The M442R module integrates 4 serial ports: two of them are RS-232C standard serial ports in a Full Modem configuration. The other two ports can be settled to work also in RS-232C Full Modem mode, or in a RS-422 or RS-485 mode. Addresses of the serial ports are default settled as standard COMs, but are user re-mappable in the I/O space. IRQ lines of serial ports are individually configurable.

There are no reviews yet.

Be the first to review “M442R EXP. 4 RS232” Cancel reply

You must be logged in to post a comment.

M543R PC104 AMD Elan™ SC520 CPU

Embedded Electronics & Solutions, CPU Modules

ELAN™ SC520 CPU with ethernet controller

The M543R module is based on the high performances CPU ELAN™ SC520 from AMD (486 at 32 bits) 133 MHz. The module supports 32 MB or 64 MB DRAM directly soldered on- board. Optionally is available a memory chip for the error correction (ECC) management. It integrates some peripherals commonly used in standard PC applications, as Ethernet Controller 10/100baseT, 4 serials, 1 parallel, floppy and hard disk controller, socket for Solid State Disk, keyboard. The module needs only a + 5VDC supply. It can be used as stand-alone or in a PC/104 stack.

M440R ARCNET

Embedded Electronics & Solutions, EXP Modules

The ARCNET protocol is the ideal solution for applications such as industrial control, building automation, transportation, robotics and gaming. ARCNET is simple to use, low-cost, extremely ruggedand high performing.

SECOMEXP-945

Embedded Electronics & Solutions, COM and Carriers Modules

The SECOMEXP-945 is a module in the COM Express type 2 basic standard, based on the 945GME + ICH7-M and supports Intel Core 2 Duo, Core Duo and Celeron M processors. This module offers up to 8 USB 2.0 ports, 2 SATA, 1 IDE, 1 Gigabit Ethernet and up to 6 PCI-Express lane x1 (four of them also configurable as 1 PCIe x4), one of which is configurable as PCI-Express lane x16 (PEG) or as Dual Channel SDVO. The presence of a Dual Channel Memory interface, on 2 SO-DIMM DDR2 SDRAM sockets for up to 4 GB, enables higher performances with same clock frequencies of the CPU.

ETX™-Baseboard M682R with Mini PCI Slot & TS CTRL

Embedded Electronics & Solutions, COM and Carriers Modules

The M682R is a compact baseboard designed to be a solution for the use of ETX™ modules. With its Mini PCI socket soldered on board it’s also suitable for applications that require Wi-Fi connections. Its very small dimensions are also the main characteristic that enables the use in wide range of products of ETX™ CPU modules.

M437R CAN Bus with 4 RS232

Embedded Electronics & Solutions, EXP Modules

The M437R module (such as M441R) is a low-cost, CAN Bus interface board that provides access to a wide range of CAN applications for PC/104 systems. The module is based on the Intel CAN controller 82527.

ETX™-Baseboard M647R

Embedded Electronics & Solutions, COM and Carriers Modules

The M647R is a compact general purpose baseboard designed to be an easy solution for the use of ETX™ modules. With its CC-Talk interface it’s also suitable for gaming applications. It’s possible to mount on board up to 512MB Flash Disk modules. The M647R is well equipped with 2.5″ HDD connector, LVDS, VGA, 4 USB and Ethernet ports. The board can receive + 12V power supply directly through a Molex minifit connector or through a Kycon KPJX-4S connector plus relay and remote power button.

SECOMX-945/M72

Embedded Electronics & Solutions, COM and Carriers Modules

The new XTX™ form factor SECOMX-945/M72 CPU module combine the Intel® Pentium® M processor with the Intel® 945GME chipset and the graphic controller ATI Mobility™ Radeon™ E2400 GPU that assure high level performances fot those 3D and high resolution demanding applications. Furthermore the SECOMX-945/M72 features Audio, SATA (2x) and IDE Interfaces, Ethernet 10/100BaseT, 6x USB 2.0, keyboard/mouse PS/2, Real Time Clock and Watch Dog Timer. Thanks to the ATI™ GPU the module support Windows® Vista Aero Operating Systems.

Ellipse 12 Integrated LCD PC

Embedded Electronics & Solutions, All in one LCD PCs

The Ellipse 12 is an All-In-One LCD PC based on an embedded PC architecture which mounts a Celeron® M Processor at 800MHz. As integrated LCD PC, Ellipse 12 can be used as stand-alone PC or Networking Terminal. It integrates a 12.1″ TFT display with 800×600 resolution 16.8 mil. colors, allowing an extended visual area and with the option of Touch Screen it is suitable for any kind of interactive applications. With up to 1GB of System DRAM and 256 Kbytes Cache, ELLIPSE 12 supports the most common Operating Systems: Windows XP and Linux.

M442R EXP. 4 RS232

M442R EXP. 4 RS232

Be the first to review “M442R EXP. 4 RS232” Cancel reply

related items