Mini PCI Adapter on PC/104 Plus
Conceived as expansion to the PC/104+ connector on which it links up to, the module allows the use of the Mini-PCI cards such as the Wi-Fi cards.
Conceived as expansion to the PC/104+ connector on which it links up to, the module allows the use of the Mini-PCI cards such as the Wi-Fi cards.
Mini PCI Adapter on PC/104 Plus
Conceived as expansion to the PC/104+ connector on which it links up to, the module allows the use of the Mini-PCI cards such as the Wi-Fi cards.
You must be logged in to post a comment.
The M429R module is a PC/104 16-bit high performance Ethernet interface. It integrates an Ethernet NE2000 compatible controller with installed both 10BaseT (twisted pair) and 10Base2 (coaxial) interfaces. From Setup it is possible to select address and interrupt line, moreover it is possible to select the transmission media and to autodetect the connection cable. The 10Base2 interface is available through an additional module installed on board. If only 10BaseT interface is selected, the 10Base2 module is disabled in order to reduce the module power consumption.
The M429R comes with drivers for a wide variety of networks ands operating systems.
The M600R is an ETX™ baseboard designed to be the startup for any customer that begin to valuate ETX™ board’s charateristics. M600R has two different set of connectors: front panel connectors (PS/2 mouse & keyboard, USB, Ethernet, Parallels and Serials, VGA) and on board connectors (ATX Power, IrDA, PC/104 and PC/104 Plus, PCI slots, Floppy Disk, Hard Disk, LVDS, Video Out).
The M520R module is a Compact Flash type PCMCIA card adapter in PC/104 format. Available with a single or dual slot it integrates on board the VG-PD6722 controller, therefore no additional external controller are needed.
he MFD2 series IDE Flash Disk is a storage device based on HYPERSTONE F2-16XN NAND type Flash controller. The module is fully compatible with IDE ATA standard interface, 44 pins connector. The MFD is free of firmware driver and it works like a normal Hard Disk Drive.
The new Quadmo747 board is the new Qseven™ platform designed by SECO on Intel® Atom™ architecture.
SECO is a founding member of Qseven™ Consortium.
The M442R module is a low-cost integrated module which offers the chance of expanding the communication possibilities of a PC/104 based system. The M442R module integrates 4 serial ports: two of them are RS-232C standard serial ports in a Full Modem configuration.
ELAN™ SC520 CPU with ethernet controller
The M543R module is based on the high performances CPU ELAN™ SC520 from AMD (486 at 32 bits) 133 MHz. The module supports 32 MB or 64 MB DRAM directly soldered on- board. Optionally is available a memory chip for the error correction (ECC) management. It integrates some peripherals commonly used in standard PC applications, as Ethernet Controller 10/100baseT, 4 serials, 1 parallel, floppy and hard disk controller, socket for Solid State Disk, keyboard. The module needs only a + 5VDC supply. It can be used as stand-alone or in a PC/104 stack.
The M585R module is a new PC/104-Plus CPU module based on the Intel® Celeron® Ultra Low Voltage 400 and 650 MHz processors. The module uses the VIA ProSavage Twister T (PN133T) chipset with integrated Savage4 2D/3D Video Accelerator and supports 4X AGP VGA/LCD interface and up to 32 MB video memory. The module also integrates the VIA enhanced audio, 2 serials, 2 USB ports, 1 parallel, up to 512 MB SDRAM, 10/100BaseT Ethernet, EIDE interface (with the possibility to use IDE Flash Disks up to 2GB), keyboard/mouse controllers, Real Time Clock and Watch Dog Timer. It is able to communicate with other peripheral boards via ISA-Bus (PC/104) and also via PCI-Bus (PC/104-Plus).
There are no reviews yet.