Manufacturer: Union Tool, Japan
RCM routers are recommended for CNC routing machines and utilise an updraft cutting action, yielding a clean work surface.
| PCB Routers | ||
| Appearance | Series | Diameter Range |
|---|---|---|
 | RCM | Ø 0.6 – 3.175 mm |
 | RHS | Ø 1.6 – 2.4 mm |
 | SC | Ø 0.7 – 3.175 mm |
 | RPU | Ø 0.8 – 3.175 mm |
 | RS | Ø 0.8 – 3.175 mm |
 | SF | Ø 0.8 – 3.175 mm |
 | RI | Ø 0.8 – 3.175 mm |
 | SM | Ø 1.0 – 3.0 mm |
 | SI | Ø 0.8 – 3.0 mm |
 | IC | Ø 1.0 – 3.0 mm |
 | RV | Ø 1.0 – 3.175 mm |
 | RA | Ø 0.8 – 3.0 mm |
UNION TOOL at the cutting edge of high performance routers.
| Style | Application | Features | Size (mm) | |
|---|---|---|---|---|
| Standard diamond router | RCM | For general contour routing | Up draft | ø 0.8 – ø 3.175 |
| RHS | High speed routing | Down draft | ||
| Chip breaker flute router | SC | Accuracy and surface finish | Up draft | ø 0.8 – ø 3.175 |
| Up draft 2-flute slitting router | RPU | Up draft slitting cutter | Up draft / 2-flute | ø 0.8 – ø 3.175 |
| Notched straight 3-flutes | RI | For hard materials | 3 straight flute | ø 0.8 – ø 3.175 |
| Single-flutes router | SF | For soft base material | Up draft / 1-flute | ø 0.8 – ø 3.175 |
| Semilunar-type cutter | SM | For spot facing work | 1 straight flute | ø 1.0 – ø 3.0 |
| Straight 2-flutes type | SI | For long-life spot facing work | 1 straight flute | ø 0.8 – ø 3.0 |
| 2-flutes taper type | IC | For taper spot facing work | Taper 2-flute | ø 1.0 – ø 3.0 |
| V-groove cutter | RV | For V-groove/scoring work | V-groove cutter | ø 1.0 – ø 3.175 |
| For nonferrous metals | RA | For nonferrous metals | Endmill type | ø 0.8 – ø 3.175 |
There are no reviews yet.